13
Press OK to validate, then button E(+) or F(-) to select day, D1 for Monday, D2
for Tuesday, D3 for Wednesday, D4 for Thursday, D5 for Friday, D6 for
Saturday and D7 for Sunday.
Press OK to validate the day, then button E(+) or F(-) to set time(hour).
Press OK to validate the hour, then button E(+) or F(-) to set time(minute).
Press OK to validate the time setting.
To exit the setting during operation, press button D(MENU).
If
icon permanently flashes, this indicates that the time is offset
following a power cut. It’s flashing as a time has not been set.
3)
Weekly Programming
The time must be set before any programming.
3 pre-set programs are available. Each program includes a time period or
several time periods during which the electric fireplace is under heating mode.
Outside of the time periods, the electric fireplace is non-heating.
The time period of one program may overlap the time period of another.
Program Definition:
P1 as Program 1:
Monday to Friday from 05:15 for 4 hours high heating, and Saturday to Sunday
from 06:20 for 4 hours low heating.
P2 as Program 2:
Monday to Friday from 17:45 for 4 hours high heating, and Saturday to Sunday
from 16:30 for 4 hours low heating.
P3 as Program 3:
Saturday to Sunday from 08:15 for 4 hours high heating.
www.aflamo.pl/en/
