15
Press button E(+) or F(-) to select the heating level. H for high heating and L
for low heating. Press Ok to validate.
Press button E(+) or F(-) to set your desired temperature. Press OK to
validate.
Press button E(+) or F(-) to set the hour of the activation time. Press OK to
validate.
Press button E(+) or F(-) to set the minutes of the activation time. Press OK to
validate.
Please note the minute setting is accumulated by 5 minutes each time.
Press button E(+) or F(-) to set the duration of the time period. Press OK to
validate.
Please note the duration time setting is accumulated by 30 minutes each time.
Till now 1
st
time period of program is completed. It’s displayed “CON”
(confirm).
NOTE: The program cannot run into the next day. The maximum duration can
therefore not exceed midnight (for example, if the start time is 20:30, the
maximum duration displayed is 4 hours and the real maximum duration is 3
hours 30 minutes).
www.aflamo.pl/en/
