MobileCare™ Monitor Operator’s Manual
Copyright 2008 © AFrame Digital, Inc.
41
PANDA X4 Gateway Specifications
Network protocols
UDP/TCP, DHCP.
LEDs
ConnectPort X4: Ethernet status, power, cellular link/activity,
signal strength (4 bars), ZigBee link/activity, Wi-Fi link/activity.
Security
–
ConnectPort X4
Security
– SSL tunnels, SSHv2, FIPS 197 (serial port).
Real-time clock.
Router/Security Features
NAT.
Port forwarding.
Access control lists (IP filtering).
VPN Features
–
ConnectPort
X4
IPsec with IKE/ISAKMP.
Multiple tunnel support.
DES, 3DES and up to 256-bit AES Encryption.
VPN pass-through, GRE forwarding.
Management
HTTP/HTTPS web interface.
Password access control.
IP service port control.
Optional secure enterprise management via Digi Connectware
Manager.
Interfaces
Serial
–
ConnectPort X4
o
1 RS-232 DB-9M serial port.
o
Throughput up to 230 Kbps.
o
Full signal support for TXD, RXD, RTS, CTS, DTR, DSR
and DCD.
o
Hardware and software flow control.
USB
o
ConnectPort X4: 1 Powered USB Type A connector (Host).
See
www.digi.com/products/wireless/usb-peripherals/
for
the list of supported USB devices.
Ethernet
o
1 RJ-45 port
o
Standard: IEEE 802.3
o
Physical Layer: 10/100Base-T
o
Data rate: 10/100 Mbps (auto-sensing)
o
Mode: full or half duplex (auto-sensing)
ZigBee/802.15.4
o
XBee-PRO (Freescale and Ember supported).
o
Cellular.
o
ConnectPort X4: EV-DO/1xRTT or EDGE/GPRS PCI
Express Module (1).
o
Wi-Fi (802.11b)
– ConnectPort X4.
o
Standard IEEE 802.11b.
Frequency: 2.4 GHz.
Data rate: Up to 11 Mbps w/ fallback.
Modulation: DBPSK (1 Mbps), DQPSK (2 Mbps),
CCK (11, 5.5 Mbps).
Transmit power: 16 dBm typical.
Receiver sensitivity:
–82 dBm @ 11 Mbps.
Connector: 1 x RP-SMA.0
Ad-hoc & AP Client Modes only; Access Point
Summary of Contents for MobileCare
Page 2: ......
