Product description
– English –
KSG
10
1.5
Modifications to the product
Changes or modifications made to the product by unauthorised per-
sons may lead to malfunctions and are prohibited for safety reasons.
1.6
Liability information
The manufacturer shall not be liable in any form whatsoever for
direct or consequential damage resulting from failure to observe the
technical instructions, guidelines and recommendations.
The manufacturer or the sales company shall not be liable for costs
or damages incurred by the user or by third parties in the usage or
application of this device, in particular in case of improper use of the
device, misuse or malfunction of the connection, malfunction of the
device or of connected devices. The manufacturer or the sales
company shall not be liable for damage whatsoever resulting from
any use other than the use explicitly permitted in this instruction
manual.
The manufacturer shall not be liable for misprints.
2
Product description
The boiler safety group assembly KSG consists of a diaphragm safe-
ty valve, a pressure gauge and a quick air vent. The components are
mounted on a carrier. The carrier is contained in an insulation piece.
1
Insulation piece
2
Carrier with factory-installed
components
3
Pressure gauge
4
Quick air vent with aqua stop
5
Diaphragm safety valve
6
Connection to heat generator
Fig. 1: Components of the boiler safety group assembly
