Aerospace Filtration Systems, Inc.
MD500-IBF-KIT-OMM/IPL
Proprietary
Information
Use or disclosure of this material is subject
MD500 IBF Operation & Maintenance Manual/
to the restrictions on the title page
Illustrated Parts List - Revision B
5
2.6 O
PTIONAL
G
ROUND
S
UPPORT
E
QUIPMENT
The IBF kit does not include an environmental protection cover, as required in paragraph 2.5
above. This cover is required if the aircraft is not kept in covered storage, e.g. a hanger. The
cover must be capable of protecting both the forward and upper filter assemblies and the static
ports at the aft end of the fairing. One such cover is available from a company called Bruce’s
Custom Covers in Sunnyvale, California. This cover or any equivalent cover must be procured
separately. If using the cover manufactured by Bruce’s Custom Covers, aircraft model 369D uses
the P/N 500D-100 cover and models 369E, 369F, and 369FF all use the P/N 500E-100 cover,
both of which are designated as an “Intake/Doghouse Cover”. The complete supplier
information is as follows:
Bruce’s Custom Covers
Phone: 408.738.3959
989 E. California Ave.
Toll Free (U.S.): 800.777.6405
Sunnyvale, CA 94085
Fax: 408.738.2729
www.aircraftcovers.com
E-mail: bruce@aircraftcovers.com
3.0 SERVICING INSTRUCTIONS
3.1
A
UTHORIZED
M
ATERIALS
Service AFS filters elements with only K&N Air Filter Oil (P/N 99-0551 or 99-0555), AFS Air
Filter Oil (P/N 100100-101 or 100101-101), K&N Air Filter Cleaner (P/N 99-0635 or 99-0640),
AFS Air Filter Cleaner (P/N 100200-101 or 100201-101), or an AFS authorized substitute. See
paragraph 3.6 for cleaning procedure and paragraph 3.11 for oiling quantities/procedure.
3.2 T
OOLS
R
EQUIRED
5/16-inch Slotted Screwdriver
#2 Phillips Screwdriver
Hand Seamer – 1 1/4 inch maximum jaw depth
NOTE:
Hand seamers are available through many commercial
aircraft supply stores (local or on-line) and also through
commercial heating and air conditioning supply stores.
Recommend the following: Malco Tools “Hand Seamer
with Forged Steel Jaw”, Catalog # S2, S3 and S6, see
www.malcotools.com
. The S3 model is also available
through Wicks Aircraft Supply, Part Number TP44-0,
“Offset Hand Seamer”, see
www.wicksaircraft.com
.
Summary of Contents for MD500 Series
Page 2: ......