If the pilot is not already alight, light the pilot as described.
Slightly depress and turn the control knob anti-clockwise
from the pilot position to the maximum position ( ) (See
Fig. 6). The fire will ignite.
Adjust the heat output as required by turning the control
knob clockwise towards the minimum position ( ) (See
Fig. 7).
To ensure correct operation of the stove it is
recommended that is
NOT
operated below the minimum
setting.
Replace the control cover.
Turn the gas control knob to the minimum gas rate
position ( ) (Fig. 8), slightly depress the knob and
continue turning to the pilot position ( ) (Fig. 9). The fire
will go out, and the pilot will remain lit and may be left on
permanently.
PLEASE NOTE:
If the fan is turned off at the control box
the pilot will be extinguished.
Turn the stove off as described. Depress the control
knob, turn to the off position (
●
) (Fig. 10) and the pilot will
go out.
Ensure that the fan is switched off.
Should the stove be subject to a power cut. On
restoration of power the gas control will require resetting
manually (see page 5).
6
FIG. 10
FIG. 9
FIG. 8
FIG. 7
FIG. 6
TO LIGHT THE STOVE
TO TURN THE STOVE OFF
TO TURN THE STOVE
AND PILOT OFF
POWER FAILURE
Summary of Contents for Coalbrookdale Little Wenlock Gas Power Flue
Page 20: ...19 SERVICING AND REPLACEMENT PARTS FIG 29 DESN 511315 ...
Page 36: ...11 ...
