Model
No. of washers
No. of screws
ADZ 6040
4
4
ATWC 60154
2
2
9
4. Installation
Installation Requirements
Before starting to use your wine cabinet, you should pay
attention to the following:
• Operating voltage for your wine cabinet is 220-240V at
50Hz.
• We do not take the responsibility of the damages
that occur due to ungrounded usage. Please refer to
“Electrical Connection” on page 13
.
• Do not place your appliance in direct sunlight.
• Your appliance should be at least 50 cm away from
stoves, gas ovens and heaters, and should be at least
5 cm away from electrical ovens.
• Your wine cabinet should never be left outdoors.
• When your wine cabinet is placed next to a deep freezer,
there should be at least 2 cm between them to prevent
humidity on the outer surface.
• Before using your wine cabinet, wipe all parts with
warm water then rinse and dry. Place all parts back in
the appliance after cleaning.
• The installation of this appliance is best carried out by 2
people.
• Dispose of all packaging carefully and responsibly.
• The appliance is designed for indoor use only and
must be protected from rain, moisture and extreme
temperature variations.
• This appliance is designed for household use. Do not
use the appliance for industrial and commercial use.
• The appliance MUST be positioned on a firm level base.
Unpacking
Please make sure that when unpacking your appliance that
it is carried out in a safe manner. Ensure the packaging is
disposed of in accordance to local regulation.
n
Do not allow children to play with the packaging
material, e.g. plastic bags and wrappings. Danger of
suffocation
Screw
Washer
ADZ 6040 x 2
ATWC 60154 x 1
Accessories Included
