FEATURES FOR MODEL AWS60DX AND ADZ60
Features For Model AWS60DX
Insert Wine Bottles
The six (6) roll-out shelves each hold eight (8) bottles. See Figure
8 for typical wine bottle spacing. Care should be taken when
storing extra tall bottles in the wine cradle at the bottom of the
compartment because they may prevent the door from closing.
Loading Tips and Suggestions
Position white wines on the middle or lower racks and red wines
on the upper racks (see Figure 9).
Keep wines that you plan to use for everyday drinking and enter
-
taining on the front half of the racks where labels are completely
visible. Place wines for aging or longer term storing in the rear.
Roll-out Racks
The six (6) roll-out wine racks may be pulled out approximately
355 millimeters to facilitate adding or removing bottles. Do NOT
lean on or press down heavily on the wine shelves. Doing so
may damage the shelves and the wine bottles stored on them.
Pull the wine racks out gently and carefully to minimize unset
-
tling your wine collection. Avoid pulling out more than one rack
at any time to maintain stability.
The single level roll-out racks allow you to easily view and access
your inventory without disturbing other bottles.
Front Bottles (Necks Facing Rear)
Rear Bottles (Necks Facing Front)
Figure 8
Figure 9
Figure 10
10
Features For Model ADZ60
Independent Storage Compartments
Both compartments can be set for either temperature range,
red or white, but for more efficient energy usage and functional
-
ity of the unit, it is better to use the top compartment for reds
(warmer) and the bottom compartment for whites (cooler).
Insert Wine Bottles
The five (5) upper shelves each hold eight (8) bottles in a front to
back fashion. See Figures 8 and 9 for typical wine bottle spacing.
The bottom shelf holds four (4) bottles in a side to side fashion.
Roll-out Racks
The top five (5) roll-out wine racks may be pulled out approxi
-
mately 355 mm. to facilitate adding or removing bottles and the
bottom shelf may be pulled out approximately 196 mm. Do NOT
lean on or press down heavily on the wine shelves. Doing so
may damage the shelves and the wine bottles stored on them.
Pull the wine racks out gently and carefully to minimize unset
-
tling your wine collection. Avoid pulling out more than one rack
at any time to maintain stability.
The single level roll-out racks allow you to easily view and access
your inventory without disturbing other bottles.
Vibration Neutralization System
The Vibration Neutralization System (VNS) is a unique three-layer
design that protects your wine from damaging vibration without
sacrificing cabinet capacity.
1. The compressor is isolated from the wine storage cavity,
virtually eliminating the transfer of vibration.
2. Vibration isolating mounts on the compressor offer a second
layer of protection from vibration transfer.
3. A vibration dampening mat inserted onto each shelf absorbs
any stray vibrations.