background image

To turn cooker off, switch off electrical supply at the wall.

When the cooker is in use the control knob should be in the HIGH section (i.e. 4/5) of the numbered band, with the indicator

on or about the black line in the silver section of the heat indicator. It may be necessary to adjust the control knob slightly

to achieve this.

Once the correct setting has been confirmed, the control will operate automatically to maintain the cooker at its correct

temperature and need not be adjusted.                                                                                                                                             

THERMOSTAT CONTROL

13

POWERED OVEN-VENTING

Roasting and Simmering Ovens

This feature is fitted to your cooker, it should be used as follows:
After placing the food to be cooked in the oven, depress the switch on the remote control, a light will appear behind the

bottom left hand door, the fan will be activated and the cooking smells will be vented outside. (Refer to Fig. 9)

REMEMBER: SWITCH THE FAN OFF WHEN YOU HAVE FINISHED COOKING.

THE HEAT INDICATOR

Fig. 9

DESN 515920

The heat indicator above the Roasting oven door is a guide to the stored heat within the AGA, and does not directly relate

to the Roasting oven centre oven temperature.

It has 3 sections black, silver and red.

To obtain your preferred working temperature the control knob can be adjusted slightly. Once set it is not recommended

to adjust on a regular basis. An AGA is designed to work at an optimum setting.

The optimum performance is usually achieved when the indicator is showing a position within one of the black segments

in the silver area.

Since the purpose of the heat indicator is to show that the AGA contains the full amount of stored heat it is best to refer to

it first thing the morning or after a period of several hours during which no cooking has been done.

NOTE: IT DOES NOT INDICATE THE OVEN TEMPERATURE.

Summary of Contents for EC-LMV





















Reviews: