Off position
Pilot ignition
Full flame
setting
Low flame
setting (Simmer)
Off position
Full flame
setting (High)
Low flame
setting (Simmer)
Rear Indicator
Front Indicator
Off position
Pilot ignition
Full flame
setting
Low flame
setting (Simmer)
SECTION 1 - GENERAL DESCRIPTION
This group of products consists of the following
appliances.
G2101 and G2107 OT
Six Burner Open Top Ranges
G2161 and G2167 OT
Four Burner Open Top Ranges
G2107 SB Solid Top Range
G2121 OT Six Burner Open Top Boiling Table
G2124 Four Burner Open Top Boiling Table
G2127 SB Solid Top Boiling Table
G2117 General Purpose Oven
G2131 and G2151
Open Top Range with Wok Burner
G2132 Open Top Range with Two Wok Burners
All models are fitted with flame failure devices to shut
off gas supply to burners if flames are extinguished.
The ovens are thermostatically controlled.
Controls
All taps are the safety type with fixed HIGH and LOW
settings. The operation sequences of the taps are
shown below.
Open Top Gas Tap
Control knob markings are as indicated below.
Each tap may be identified with the corresponding
burner as illustrated below -.
Solid Top Gas Tap
The control is identified by the symbol shown below.
Wok Burner Gas Tap
The control is identified by the symbol shown below.
Oven Thermostat
The oven is thermostatically controlled. The control
knob markings are in degrees celcius. This control is
identified by the symbol shown below.
Note
Spark ignition button is located below oven
compartment.
Oven doors must be opened to gain access to device.
