AGA PRO+ APRO36DFSS, User Manual & Installation & Service Instructions

CONVERSION

Check the appliance is electrically safe and gas sound when you have finished.

24

Burner Cap

Burner Cap

Inner 

Burner Base

Outer 

Burner Head

Outer

Burner Head

Outer

Burner Base

Burner

Base Cup

Outer 

Burner Base

A

B

C

Important!

• 

Observe all governing codes and ordinances.

• 

The range must be properly grounded.

• 

Save these instructions for the local electrical inspector’s 

use.

When servicing or replacing gas carrying components 

disconnect from the gas supply before commencing 

operation and check the appliance is gas sound after 

completion. When checking for gas leaks use a liquid leak 

detector at all joints and connections to check for leaks in 

the system. Use a product specifically manufactured for leak 

detection. Leak testing of the appliance shall be conducted in 

accordance to the manufacturer’s instructions.

For Your Safety

DO NOT store or use combustible materials, gasoline or other 

flammable vapors and liquids in the vicinity of this or any 

other appliance.

Conversion to Propane

This appliance is supplied set for Natural gas. A conversion kit 

for Propane gas is supplied with the range.
If the appliance is to be converted this must be done before 

installation. The conversion must be performed by a qualified 

LP gas installer. After conversion the installation must comply 

with the relevant regulations and also the local electricity 

supply company requirements. Read the instructions before 

converting this appliance.
Failure to convert the appliance correctly could invalidate any 

warranty or liability claims and lead to prosecution.
This instruction must be used in conjunction with the rest 

of the appliance instruction, in particular for information on 

Standards, range positioning, connection hose suitability, etc.
When servicing or replacing gas-carrying components 

disconnect from gas before commencing operation and 

check appliance is gas sound after completion.
DO NOT use reconditioned or unauthorized gas controls.

Orifices

Remove burner caps and heads 

(Fig. 8.1)

. Remove the 

old orifices 

(Fig. 8.2)

; save the orifices removed from the 

appliance for future use. 
Fit the new orifices; see 

Table 8.1

 for details. Reassemble in 

the reverse order.

Table 8.1

8.  Conversion to Another Gas

Fig. 8.1 

Fig. 8.2 

A

 – Jet,  

B

 – Internal injector,  

C

 – External injector

Natural Gas

orifice

Propane Gas

orifice

Input

Jet

150

100

12,000 Btu/h

Jet 

(front center burner)

188

122

18,000 Btu/h

Internal Injector

165

107

15,000 Btu/h

External Injector

42

38