Page
24
of
34
Customers Touch Control:
To gain access to the TCU whether to exchange or to gain access to the thermocouple connections
the cooker front plate will need to be removed, to do this the top plate will need to be propped, the
front plate is secured by three studs/nuts along its top length, remove the nuts and pull the top
plate forward and lifted away from the cooker base plate leaving the tunnels and control panel
secured to the main cooker chassis. Silicone seals are attached to the front plate which would
require replacement if the front plate is exchanged.
Front Plate:
To remove the front plate, remove the cooker doors and store safely, then undo the 3 securing nuts
sited along the top length of the front plate, pull the front plate forwards and lift away from the base
of the cooker, replace in reverse order.
Securing nuts
Cooker with the front plate removed, when the front plate is replaced the
base locates into the cut outs in the plinth and replace in reverse order.
Summary of Contents for RANGEMASTER eR7
