AgaMatrix Jazz, Owner'S Manual

26

27

IMPORTANT: 

[1] Remove the test strip from the blood sample as soon as 
you hear the beep.

[2] Do not press the AgaMatrix Jazz Test Strip against the 
test site. 

[3] Do not scrape blood onto the AgaMatrix Jazz Test Strip. 

[4] Do not apply blood to the top side of the AgaMatrix Jazz 
Test Strip.

[5] Do not apply blood to the AgaMatrix Jazz Test Strip 
when the test strip is out of the meter. 

[6] Do not put blood or foreign objects into the AgaMatrix 
Jazz test strip port. Doing so may lead to system failure.

[7] Do not apply more blood after beep. 

[8] Carefully read the test results 
on the display before making any 
treatment decisions.

Remove Test Strip from Blood Sample 
when you hear the beep:

 Your meter 

will beep once, when you should 
remove the tip of the AgaMatrix Jazz 
Test Strip from the blood sample.

On the meter display, the droplet symbol 
fills. The scrolling bar and 1-2-3 indicates 
that the meter is calculating your results.

Your test is completed when your blood 
glucose test result with time and date is 
shown on the display. If the volume is ON, 
you will hear a beep. Your test result is now 
stored in the memory.

[5] Test Result Mealtime Tagging and 
Feedback

If the Mealtime Tag Feature is Enabled: 

The AgaMatrix Jazz 

Meter allows you to add a tag to your test result. Tagging 
results allows you to view averages before and after meals to 
see what effect food has on your blood glucose levels. 

After your result appears, a tag will flash on the display 
suggesting a mealtime tag (Breakfast, Post Breakfast, Lunch, 
Post Lunch, Dinner, Post Dinner, and Night). For example, if you 
test at 12:30 PM, the meter will flash the word “POST LUNCH.” 

If the tag is incorrect, you can change it by 
pressing the DOWN (

) or UP (

)

arrow buttons. Pressing the UP (

) arrow 

button would change the tag to Lunch, 
pressing the DOWN (

) arrow button 

would change the tag to Dinner. Pressing 
the CHECK ( ) button confirms the 
mealtime tag and it stops flashing. Your 
test result’s mealtime tag is now stored 
in the memory. You can still change this 
setting by pressing the DOWN 
(

) or UP ( ) arrow buttons, if you 

Example of 
Mealtime Tag: 
POST LUNCH

Droplet 
Symbol: