48
49
[3]
Select An Alarm to Set:
Choose the alarm you want to
set with the DOWN (
) or UP (
) arrow buttons.
If this is your first time setting an alarm, use AL1.
Press the CHECK ( ) button to confirm your selec-
tion and advance to the alarm ON or OFF section.
[4] Turning Alarms ON or OFF:
Turn the alarm
ON or OFF with the DOWN (
) or UP (
) arrow
buttons. Your selection will be highlighted by the
blinking of the symbol. Press the CHECK ( ) but-
ton to confirm your selection and move to the set
alarm time section.
[5] Set Alarm Time:
You can now set the alarm
time. First, set the hour (flashing numbers) with
the DOWN (
) or UP (
) arrow buttons. Accel-
erated change is possible by holding down the
arrow buttons. Press the CHECK ( ) button to
confirm the hour and advance to the minutes.
Set the minute (flashing numbers) with the DOWN
(
) or UP (
) arrow buttons. Press the CHECK ( )
button to confirm the minutes and return to the
MENU Mode.
Note: The volume of an alarm will be affected by your meter’s
volume setting, which can be changed in the meter’s “BEEP”
option. If your meter has the volume turned OFF, then the alarm
will not sound, but the backlight will flash.
[6] Setting Multiple Alarms:
To set other alarms, press
the DOWN (
) or UP (
) arrow buttons until the alarm you
want to set (AL1 to AL7) is displayed. Follow the previous
steps in this section.
There are 7 alarms you can set to remind you when to test
your glucose levels.
When alarms are activated:
[1]
If an alarm is set and the AgaMatrix Jazz Meter is deacti-
vated, the alarm will activate the meter. “AL1” thru “AL7” (de-
pending which alarm is set) is displayed. The display backlight
flashes, and the meter will beep repeatedly for 15 seconds.
[2]
You can turn the alarm OFF by pressing any button.
[3]
The alarms will not appear during menu and test modes.
If an alarm is set to sound or flash while using these modes,
it will alarm after the meter is deactivated.
CAUTION: Follow your healthcare professional’s recom-
mendations on when and how often to test your glucose.
How to set alarms:
[1]
Enter MEM Mode:
When your meter is deactivated,
press the CHECK ( ) button once to enter menu mode. The
word “MEM” is displayed.
[2] Enter Alarm Option:
Press the DOWN (
)
or UP (
) arrow buttons until the word “ALARM”
is displayed. Press the CHECK ( ) button to enter
and set an alarm.
Setting Alarms
18
CHAP
TE
R
Summary of Contents for Jazz
Page 1: ...OWNER S GUIDE Advanced Blood Glucose Monitoring System ...
Page 34: ......
