During periods of non-use, this trampoline and trampoline enclosure can be easily disassembled and
stored. Please read the assembly instructions before beginning to assemble the product.
This trampoline must only be used when the enclosure netting is properly assembled. The trampoline
netting must be checked thoroughly before each use to ensure there are no tears or damages. Please
carefully read all the Important Warnings contained in this manual and all warnings on the product before
use.
Review all steps before assembly and read all precautions before using the trampoline. At least two
adults are required to assemble this trampoline enclosure. Protective gloves must be used during
assembly to avoid injuries during installation and goggles must be worn to avoid injuries to the eyes.
STEP 1
Attach the snap-in buckles on the top of the netting enclosure to tube cap as shown. Attach the top snap-in
buckles for all tube frames. Please make sure the cap holder is facing outward.
Tie the end of the cord to the triangle-ring first, then pull the cord through the edge of the net and triangle ring
as shown. Continue threading the cord until the entire net is secured to the trampoline.
6
Assembly Instructions
