Care and Maintenance
The springs, trampoline legs and enclosure netting must be inspected prior to every use. The legs
should be locked securely into place, all the springs attached to the frame and there should be no
tears in the enclosure netting. If any part becomes damaged or worn, please stop using the
trampoline immediately until this part is replaced with authorized Sportspower parts.
If you see any signs of stretched or damaged springs, do not use the trampoline until replacement
springs are properly installed. Please contact our customer service representatives to order original
Sportspower replacement parts.
Please do not use unauthorized Sportspower parts to assemble the trampoline. This may damage
the integrity of the product and can cause injuries during use.
To move the trampoline, it is recommended for the trampoline to be disassembled and then
reassembled in the new location. However, if you need to move the trampoline a short distance for
any reason, you must use duct tape or heavy industry tape to tape all leg joints together. To move
the trampoline requires two or more people to lift the trampoline from contact with the ground. Do not
drag the trampoline along the ground. The trampoline must be kept steady and horizontal to the
ground during the move. Failure to follow these instructions may result in the leg support coming
loose which may cause serious injury or death.
The trampoline and enclosure must be stored away during harsh weather conditions including
extreme wind, heat and freezing temperatures.
Always properly store away the trampoline and enclosure when not in use and secure from any
unauthorized use.
Inspect the trampoline before each use and replace any worn, defective or missing parts. The
following conditions could represent potential hazards:
Missing, improperly positioned or unsecured enclosure support system, frame padding and
pole caps
Punctures, frays, tears or holes in the trampoline mat or enclosure support system or frame
padding
Deterioration in the stitching or fabric of the mat, enclosure netting or frame padding
Sagging trampoline mat and/or sagging enclosure netting
Sharp protrusions on the support (frame) or suspension system
If you live in area with high salt and moisture content in the air, we strongly recommend that you paint the
trampoline frame and springs with a rust resistant clear coat paint to add protection to the steel
components.
8
Failure to follow these instructions to ensure proper operational condition of your
trampoline may lead to serious injury or death.
