background image

Safety

Revision: Feb. 2018

11

3.11  SAFETY SIGN LOCATION

A)   INSIDE OF THE LID: 

The types of safety signs and locations on the equipment are shown in the illustrations that follows. Good 

safety requires that you familiarize yourself with the various safety signs, the type of warning and the area, or 

particular function related to that area, that requires your SAFETY AWARENESS. 

B)    STICKERS LIFT:

Install these stickers on each side of the tank (left, right, front and rear)

Example of a 5000L sticker

!

OPERATING INSTRUCTIONS

Read “User Notice” and Operator’s Manual before 
using fuel tank.
This equipment is designed for the transport of diesel 
fuel /gas or refueling equipment or generator stand-
by. 
The tank must be level while filling.
Fill only with a hand held trigger nozzle. Do not spill 
on the ground or in the tank.
Do no smoke when refuelling. Keep sparks, flames 
and hot material away from fuel and fuel tank.
Do not overfill. 95% capacity is maximum legal limit.
Always replace filler cap and turn pump off (lever 
down).
Store diesel hose and nozzle inside outer tank.
Close all valve outlets and lock lid when transporting 
on public highway.
Follow the regulations for Transport of Dangerous 
Goods.
Check for fluid in outer tank and empty regularly-refer 
to maintenance manual for detailed procedure.

1.

2.

3.
4.

5.

6.
7.

8.
9.

10.

11.

Summary of Contents for Guardian DT1 1000 L


























Reviews: