Operation
Revision: Feb. 2018
16
i.
Turn the pump off when the refueling is completed.
j.
Disconnect the power to the pump.
k. Store the hose into the bund and hook the nozzle to the storage bracket.
l.
Close and lock the hatch lid.
m. Move to the next refuelling location
8.
Fuel Gauge:
The DT1 is equipped with a gauge that displays the amount
of fuel in the tank. Always watch the gauge when filling the
tank to prevent over-filling.
The DT1 is equipped with a sight glass at the bottom left side that allows you to
see if there is a leak in the double wall gap.
9. Forklifts:
The DT1 base is designed with openings on all sides to allow
access for a forklift. A forklift can pick up the tank from any
side when it is necessary to raise or manoeuver the unit.
