4
OPERATION AND MAINTENANCE
DANGER
NEVER ALLOW ANYONE TO RIDE ON
THE SF4800 SOIL FINISHER AT ANY
TIME. ALLOWING A PERSON TO
RIDE ON THE MACHINE CAN INFLICT
SERIOUS PERSONAL INJURY OR
DEATH TO THAT PERSON.
DANGER
DISC BLADES ARE EXTREMELY
SHARP. EXERCISE EXTREME CARE
WHEN WORKING ON OR NEAR DISC
BLADES. DO NOT ALLOW DISCS TO
ROLL OVER OR FALL ONTO ANY
BODILY PART. DO NOT ALLOW
WRENCHES TO SLIP WHEN WORK-
ING NEAR DISC BLADES. NEVER
PUSH WRENCHES TOWARD DISC
BLADES. DO NOT CLIMB OVER MA-
CHINE ABOVE DISC BLADES. FAIL-
URE TO STAY CLEAR OF DISC
BLADE EDGES CAN CAUSE SERIOUS
PERSONAL INJURY OR DEATH.
WARNING
ALL
HYDRAULICALLY
ELEVATED
EQUIPMENT MUST HAVE CYLINDER
LOCKOUTS INSTALLED OR BE LOW-
ERED TO THE GROUND, WHEN
SERVICING OR WHEN EQUIPMENT IS
IDLE. FAILURE TO TAKE PREVEN-
TIVE MEASURES AGAINST ACCIDEN-
TAL LOWERING CAN RESULT IN SE-
RIOUS PERSONAL INJURY.
DANGER
ALWAYS
LOCK
THE
TRACTOR
DRAWBAR IN THE CENTER POSI-
TION WHEN TRANSPORTING THE
UNIT. FAILURE TO DO SO CAN RE-
SULT IN SERIOUS INJURY OR DEATH
AND CAUSE DAMAGE TO THE
EQUIPMENT.
DANGER
WHEN TRANSPORTING THE UNIT,
PLACE CYLINDER LOCKOUTS IN THE
TRANSPORT LOCK POSITION AFTER
FULLY EXTENDING THE CYLINDERS.
INSERT THE LOCKOUT PINS TO SE-
CURE THE CYLINDER LOCKOUTS.
FAILURE TO LOCKOUT THE CYLIN-
DERS CAN CAUSE THE UNIT TO SET-
TLE DURING TRANSPORT, WHICH
CAN RESULT IN SERIOUS INJURY
OR DEATH AND CAUSE DAMAGE TO
THE EQUIPMENT.
CAUTION
WHEN TRANSPORTING FARM IMPLE-
MENTS ON PUBLIC ROADS, IT IS THE
RESPONSIBILITY OF THE OPERATOR
TO ABIDE BY STATE AND LOCAL
LAWS CONCERNING WIDE LOADS,
SPEED, SAFETY EMBLEMS AND
SAFETY
LIGHTING
EQUIPMENT.
DRIVE AT SAFE SPEEDS. PARTICU-
LARLY WHEN ROUNDING CORNERS,
CROSSING ROUGH GROUND OR
DRIVING ON HILLSIDES, TO PRE-
VENT TIPPING THE TRACTOR.
4-1
Summary of Contents for Glencoe SF4800
