1.2.7.6 Shield and guards
WARNING: Entanglement hazard.
Belts and components that rotate.
Severe personal injury or death can
occur.
Do not open, remove, or put your
hand behind shields if the engine is
running. Stop the machine before
doing service to the machine.
All shields and guards must be in the correct
position and in good condition. Keep away from
the components that rotate.
GUID-6163F2D6-39D6-48BF-871C-AC346EE022D2-high.jpg [High]
Fig. 17
DANGER: Entanglement hazard.
Rotating components.
Severe personal injury or death can
occur.
Do not make adjustments or repairs
to components while they are
moving. Stop the machine before
doing service to the machine.
Do not operate the machine with the drive shaft
shields open or removed.
Keep away from the components that turn.
Make sure guards that turn are free.
GUID-CEB32148-1F4C-457C-ADF7-595DFC51AC25-high.jpg [High]
Fig. 18
1.2.7.7 Power take-off safety
Keep all shields in place.
The rear power take-off (PTO) master shield (1)
must be correctly installed at all times. The PTO
shaft cover(s) must be installed when the PTO
driveline is not in use.
Do not use PTO adapters. PTO shaft adapters,
reducers and/or extensions extend the implement
drive shaft coupler and universal joint beyond the
protection of the PTO master shield.
Reduce PTO speed slowly. When stopping any
PTO driven machine, idle the engine to reduce the
PTO speeds before disengaging.
GUID-BF7DE9A5-FD7D-4F4B-8959-B4E19A04061B-high.jpg [High]
Fig. 19
GUID-9398BDE6-F83A-4855-B266-E86D0B48B9D7 [V9]
GUID-CEF3A160-394D-4520-8BAB-D3FB6D1D0D38 [V2]
1. General
1700M Series Compact Tractors
1-13
4283619M1
