background image

The implement drive shaft coupler (1) must

securely lock to, and be retained by the annular

groove on the tractor PTO shaft.
Always disengage the PTO, park the tractor, shut

off the engine and remove the key before:
• Connecting or disconnecting the implement

drive shaft.

• Adjusting the PTO driveline or PTO driven

machine.

• Cleaning, unplugging, or servicing the PTO

driven machine.

GUID-A25474AA-9D4A-4FA5-95C3-D1507C3CE13A-high.jpg [High]

Fig. 20  

1.2.7.8  Exhaust warning

WARNING: Inhalation hazard. Exhaust
gases.

Death or serious illness can occur.

Do not operate the engine in a closed
building unless the exhaust is
ventilated to the outside.

Do not tamper with or modify the exhaust system

with unapproved extensions.

GUID-55072A39-D882-4355-8ABA-05660F3F6EDA-high.jpg [High]

Fig. 21  

1.2.7.9  Agricultural chemicals

Agricultural chemicals are very dangerous. Incorrect procedures with fertilizer, fungicides, herbicides,

insecticides and pesticides can cause injuries to plants, animals, soil and other persons property.
Always read and follow all manufacturers instructions before you open chemical containers.
Read and follow instructions each time you use a chemical.
Use the same precautions when you do adjustments, do servicing, clean or store the machine as used

when you put chemicals into the hoppers or tanks.
Tell all persons who are near chemicals of the possible dangerous results and the safety precautions that

are necessary.
Stay upwind and away from smoke from a chemical fire.
Keep or discard all chemicals that are not used as specified by the chemical manufacturer.

GUID-AC6BA923-B398-43F4-BFAE-5130AFED6FC5 [V4]

GUID-A494D2FA-1956-40C4-9743-052166A2A431 [V4]

1. General

1-14

1700M Series Compact Tractors

4283619M1

Summary of Contents for Massey Ferguson 1700M Series




















































Reviews: