Agent W880, Operation Manual

3.1.3 Making an outgoing call in VOIP mode.

• 

Ensure that the ‘VOIP’ button (8) on the front of 

the headset base is selected.

• 

Lift the headset from the base or press the 

headset’s ON/OFF button (2) if you are already 

wearing it and the base ‘IN USE’ LED (5) will 

light.  

• 

After fi nishing your VOIP call, press the 

ON/OFF button (2) to disconnect. 

The headset LED (1) and the base 

‘IN USE’ LED (5) will turn off .

3.2  Adjusting the Ringing Volume

When the headset is ringing to indicated an 

incoming call, you can adjust the ring volume by 

moving the rocker switch (17) at the back of the 

headset. 

3.3  Muting The Headset Microphone

To mute the headset microphone when on a call, 

press the Mute button (18) on the back of the 

headset.  While the headset is in Mute mode, a short 

beep will be heard on the headset every 8 seconds.  

Press the  Mute button (18) again to release the 

mute.

3.4  Headset transmitting volume setting

During a call you can adjust the transmit volume 

of the headset by using the two buttons (9 and 10) 

located on the back of the headset base.

3.5  Adjusting Headset Receive Volume

Use the rocker switch (17) at the back of the headset 

to adjust the receive volume on your headset. You 

will hear a beep sound for each volume step Up or 

Down.