Agent W880, Operation Manual

3.6  Out of range and reconnection

You will hear a warning tone in the headset when 

you walk out of range of the base. The headset will 

be disconnected from the base and the call will be 

automatically placed on hold. If you move back

inside the range of the base the headset will auto-

matically reconnect and the call will be active again.  

NOTE: If you do not move back inside the base range 

within 5 minutes the call will be disconnected.

3.7  Battery – Hot Swap

The user can “Hot Swap” the headset battery while 

on a call. When the battery is removed from the 

headset, the base unit will put the call on hold for a 

maximum of 5 minutes. 

When the new battery is fi tted to the headset, the 

‘IN USE’ LED (1) will turn on and the call will be active 

again. 

Put the second battery in the Battery charging slot 

(19) on the back of the base. The battery can be 

removed by sliding the battery remove button (20) 

sidewards.

3.8  Battery Level Indication

The four LED’s (6) on the front of the headset base 

indicate the battery level of your headset battery.  

Indication

Battery level

One LED fl ashing

< 20%

One LED on

20%-40%

Two LED’s on

40%-60%

Three LED’s on

60%-80%

Four LED’s on

80%-100%