background image

 

 

 

y

  Risk of explosion if battery is replaced by an incorrect type dispose of used 

batteries according to the instructions. 

y

  Be sure to turn off the camera power before insert or remove batteries. 

y

  Remove batteries if you will not be using them for a long time. 

y

  The camera body may feel warm after extended use. This is normal. 

y

  Use only the special rechargeable lithium-ion battery to power this camera. 

y

  Charging time is varying with current battery capacity and charging conditions. 

 

Inserting the Memory Card 

You can use SD Card with this digital camera. The memory card slot is located beneath 

the battery cover, adjacent to the battery compartment. 

 

 

 

Open the battery cover. 

y

  Slide the battery cover in the 

direction indicated by the 

arrow. 

 

 

 

 

Insert the card. 

y

  Insert the card with the label 

facing up and the arrow 

pointing in. 

 

 

y

  To remove the card, gently press on the edge of the card and release it.    Pull 

the card out and close the battery cover. 

 

 

 

Close the battery cover. 

 

 

 

y

  It may cause damage to the card if removed while the camera is on. 

y

  Do not touch the connection terminals on the back side of the card. 

 

 

C

C

a

a

u

u

t

t

i

i

o

o

n

n

 

 

 

T

T

i

i

p

p

s

s

 

 

 

C

C

a

a

u

u

t

t

i

i

o

o

n

n

 

 

Summary of Contents for DC-1338i


































































Reviews: