U - 7
User Guide
Auto Dialling (Hotline)
With this feature a pre-set number is dialled within 10 seconds after lifting the receiver.
Calls can still be made normally providing dialling commences within 10 seconds.
Lift Receiver
Automatic Dialling
Notes
Check your Auto Dialling setting after programming the external phone number. Activate the
Auto Dialling mode, lift the receiver, wait -until the external phone number is dialled and
check that the right connection is -established.
The Auto Dialling function has preference over all other external connections. If necessary,
one line (one B-channel) will be force released in order to complete autodial.
If the called party is busy, the telephone -system attempts to redial the external phone
number every 10 seconds.It cancels Auto Dialling after 12 -attempts.
If you hear the error tone when you activate the Auto Dialling feature, no telephone number
has been programmed.
If the Auto Dialling feature is on, you hear the special dial tone when you pick up the -
receiver.
Replace receiver
Acknowledgement
tone
Switch Auto Dialling on/ off
h
*288
q
ª
2
3
on
off
Storing/ Deleting a Number for Auto
Dialling
h
*288
q
ª
Store
Delete
3
5
E z
#
Enter an external phone
number, max 24 digits an
conclude with #
You must start programming mode by entering:
h
P
*PRO
Q
ª
Continue programming or end the programming mode by entering:
h
P
*END
Q
ª
Lift receiver
Automatic dialling
Replace receiver
Acknowledgement
tone
on / off:
Summary of Contents for AC 14
