U - 15
User Guide
Automatic Call Back
You can set up an automatic call back if the number you are calling is busy. This feature is
only available to subscribers of ISDN lines. Your phone will ring as soon as the called party
replaces the receiver. The other party will be called automatically as soon as you pick up
your receiver.
h
z
q
r
*783 q ª
Lift receiver
Call the external subscriber,
busy tone, the subscriber is busy
Enquiry
Set Up Callback
When making an external enquiry / brokering you must always seize the outside line by
pressing „0“, even if spontaneous outside line seizure with internal is set on the telephone.
An outside caller will hear Music on Hold if placed on hold.
If you replace the receiver during an enquiry:
- You clear the current call,
- You receive a callback if a call is still on hold,
- You transfer an external call on hold to the internal user with whom you were in an
enquiry.
Connection charges are incurred for the external call, even while the call is on hold.
Notes
Replace receiver
If you hear the error tone then it will not be possible to be called back from the busy
number. The feature Call Back on busy is not available from the telephone exchange.
The feature will be cancelled if you do not answer the returned call within 20 seconds.
Call Back will be cancelled if the Call Back feature is completed or failed to connect the
call after 45 minutes.
Notes
Do Not Disturb
You do not wish to be disturbed by calls and you activate the do not disturb feature.
You can also define whether do not disturb is to apply only to internal calls, to external calls
or to all calls and you can deactivate do not disturb again.
If do not disturb is active, ringing on your telephone is off and internal callers hear the busy
tone. You can continue conducting telephone calls in the usual manner. When you pick up
the receiver, the special dial tone reminds you that the do not disturb feature is on.
Summary of Contents for AC 14
