U - 19
User Guide
Sending CLIP or COLP
The telephone system transmits your phone number to another ISDN subscriber before the
connection is established (default setting of the system). Two types of settings are available
within the ISDN network:
Forwarding the telephone number to the called party (CLIP = Connected Line Identification
Presentation):
Your telephone number will be forwarded to the subscriber you are calling.
Forwarding the telephone number to the calling party (COLP = Connected Line
Presentation):
Your telephone number is forwarded to the subscriber calling you. This ISDN feature will
have to be ordered from your network provider.
h
*792
q
ª
off
on
2
3
Timer
h
* 846
4z
q
ª
Lift
receiver
Timer
Acknowledgement
tone
Replace receiver
2
3
Timer Group
Lift receiver
COLP
Replace receiver
Acknowledgement
tone
Setting COLP to on / off
The telephone system has a total of 10 timers. These can be used to activate certain
functions at specific times. The following features can be time controlled:
-Day / Night Service
-Internal call forwarding
-Busy on Busy
-External line access
-Telephone lock
-Disable Call Waiting
-Diversions
You can assign a function to any timer.
The timers can only be programmed in the “TK-Set ”program.
Timers can be switched on or off manually from any phone for example the Office closes
early and therefore night service needs to be switched on prior to the set time.
Several timers can be grouped into one so that they can be activated simultaneously.
Timer off
Timer on
Summary of Contents for AC 14
