P - 18
Programming
Loading the telecommunictaion systsme´s
system data
Copy the stored system data back from the PC into the telecommunications system.
The telecommunications system now operates with the new software.
Save configuration data
- Start the "TK-Suite" configuration program on your PC
- Read out all data of the system .
- Save the data on the hard disk or on a diskette.
Downloading new Firmware
The AGFEO ISDN Telephone System can be upgraded to the lastest software version, without
the need to change any hardware. New software can be loaded into the telephone system
using a PC connected via the USB or V.24 interface . New software may also be loaded
remotely by your dealer via the ISDN telephone line.
Update your software
- Unpack the Firmware Update Files into the "Updates" subdirectory of the TK-Soft direc-
tory on your hard disk (eg. "C:\TKSoft\updates").
- Start the "TK-Flash" update program
Refer to the online help for details of how to operate "TK-Flash".
The new software is now loaded into the telecommunications system. You cannot make
any telephone calls during the load operation (approximately 5 minutes). You can observe
the load process on the PC’s monitor.
- End
"T
K-Flash
".
- Clear the telecommunications system’s memory from the a telephone (reset to delivery
settings, P - 4)
Summary of Contents for AC 14
