A - 6
Appendix
Resetting the telephone system
By resetting, you can restore the telephone system’s programming to a defined state. This
may be necessary if you wish to reset unclear settings or if you wish to reprogram the
telephone system.
After a reset, the telephone system again operates according to the previously set program.
All settings made in the programming mode or by means of the PC program are retained
provided the programming mode has been ended properly.
Important: the following are cleared when you reset the telephone system. - All existing
internal and external connections
- Remote support
- Internal return calls
- ISDN callback on busy
- Outside line reservations
Hardware reset - unplug the 230 V power mains plug and then plug it in again.
Software reset - carry out the following procedure:
Software - Reset
h
*737
ª
Replace receiver
Lift receiver
Start programming mode with:
h
*PRO
q
ª
Summary of Contents for AC 14
