1 - 82
System Telephones
ST 20/25
DECT 30
ST 30
Diversion via the public switched telephone network. Call forwarding can only be setup if this
feature has been ordered from your telephone exchange.If call forward is carried out on a
Point to Point (PTP) connection then the entire line including all DDI‘s are forwarded. To
forward individual DDI numbers via the telephone exchange and without busying your second
B Channel you must have the feature PARTIAL RE-ROUTING enabled in the program of the
telephone system.
Using this feature on a Point to Multipoint (PTMP) then partial re-routed does not need to be
set as each individual MSN can be diverted. When using a call forwarding button on your
phone you can select the line to be forwarded.
Call forwarding can also be programmed remotely from any telephone. For instructions on
how to activate call forwarding remotely, please refer to your user manual for analogue
extensions under the heading ‘Diverting to....‘ A destination telephone number must have
been programmed if you want to switch on or off call forwarding via a feature button. The
following types of call forward are available.
-Forward all calls
-Forward on busy
-Forward on no reply
Programming a Call Forwarding
Destination
!%
&
$
&
$
z
$
z
$
or
!
Press SET and the CALL FORWARDING button
or press SET 81 to program the forwarding
destination.
Press NEXT to select the next free available
entry.
Press ENTER to confirm
The first entered number will be displayed.
Press next to select a line which should be
forwarded.
Press ENTER to confirm the selected line.
Enter the destination telephone number and
press
ENTER to confirm.
Select the condition under which a call shall be
forwarded ie
1 = All Calls
2 = When Busy
3 = When no Answer
Press ENTER to program another line or
Press SET to end programming.
You can enable or disable Call Forward with the
‘ISDN Call Forward‘ button.
Call Forwarding
!%
&
$
&
$
z
$
z
$
or
!
AQA
z
J
H
J
H
z
H
IJH
H
or
D
Summary of Contents for AS 100 IT
