HS-Module 30
4
The HS 30 headset module consists of a slot-in module for the ST 30 system telephone.
This module allows the signaling of 'Off-hook', 'On-hook' and 'Ring' to be transmitted between
the headset and the ST 30.
At the jack, the module provides an interface for signaling 'Off-hook', 'On-hook' and 'Ring'. The
interface is supplementary to the standard, 4-core interface for listening and speaking on the
headset jack (on the underside of the ST 30). Correspondingly, you need to connect your headset to
the ST30 with 2 cables.
System Documentation
Software version 3.1 or above needs to be installed on your ST 30 system telephone for the module
to function. The version installed appears on the display when you connect your telephone: for
instance 'ST 30 Digital Ver. 3.1'. The telephone has to be updated before slotting in the module.
The system firmware does not have to be updated!
The HS 30 functions on all AGFEO PBEs which support the ST 30 system telephone.
To update the telephone's software, press
*
,
0
and
#
simultaneously. This procedure is
described in detail in the Appendix 'Updating your ST30'.
System Requirements
Included in Supply Package
- 1 HS Module 30
- 1 RJ 11/RJ 11 cable (60 cm)
- 1 RJ 45/RJ 45 cable (60 cm)
- 1 Installation Instructions
