System Telephone
ST 40
18
Please program a headset button for the ST 40 or STE 40 either via TK Suite Basic or the system
programming code XX 31.
- You now will be able to answer or clear a call for the headset.
Your headset will also ring in the earpiece once your telephone rings.
- You can answer the call by pressing the programmed headset button on the ST 40 or STE 40, or by
pressing the button directly on your headset.
- If so required you may disable the ringer of the ST 40 but still will hear a call ringing directly in the
earpiece of your headset. This will be ideal for call centres or open plan offices.
- If the caller hangs up, then the telephone system will also clear the call and the headset goes
automatically on hook. There is no need to press a button on the ST 40 or the headset to go back
on hook.
DSHG Headset Operation
ST 40 Firmware Upgrade
Your System Phone ST 40 can be upgraded to the latest firmware level without the need to change
any hardware. To do so please do the following:
-
*0#
1
z
With the handset
on hook the Sy-
stem Phone ST
40 is idle.
Press the buttons
*
,
0
,
#
all at the same
time. The ST 40 is now in
service mode.
Select SoftwareUpdate by
pressing the digit
1
.
If for any reason you do
not want to continue with
the update but want the
phone to return to normal
operation, then press digit
3 "Hauptprogramm"
(Main Program).
Enter the telephone
number of the Update
Server
004952144709950
[Updateserver AGFEO
Bielefeld]
If required enter access
digit 9 if no spontaneous
line seizure is set.:
9004952144709950
Confirm entry with
middle soft button
(ok). The Update
Server will now be
dialled and the
update will start.
The update will be completed within approx. 90 seconds. The ST 40 will automatically re register to
the telephone system. On start up the software level will be displayed on the phone. The update is
now completed.
