System Telephone
ST 40
8
Function Buttons - Freely programmable
Function Buttons (overview)
To switch TAM module on or off of the ST 30 System Phone.
To listen to messages recorded on the TAM.
To record messages on the TAM
Reject the ringing call. Caller will hear busy tone.
You can select if:
If the caller will get busy tone if on a call. (off)
If a waiting call should only be visually indicated on your phone.
Or if a call waiting tone should be signalled. (audible)
To divert an incoming call during the ringing phase. There will be no change to the
ringing tone when diverted. The caller will not be aware that the call was forwarded.
To switch Call Filters on or off.
Will list the Call Log
In connection with the check in / check out button. This can be used to signal to the
front desk that a room has been cleaned and is ready for occupation.
This will disable the Tone Ringer
Special function buttons may be set:
DND for internal calls
DND for external calls
DND for internal- and external calls.
Night Service on or off.
Special function buttons may be set:
Night Service can be switched for each trunk line.
Night Service can be switched for all trunk lines.
Enable / Disable Call Forward if designated extension does not answer on incoming call.
Special function buttons may be allocated:
Switch Call Forward for each trunk line.
Switch Call Forward for all trunk lines.
Announcement via Public Address Amplifier connected to the Telephone System
Return Busy Tone to Caller if one Extension is Busy within Call Distribution Group.
Special Buttons can be assigned
-Busy on Busy for each Call Distribution Group swithcable seperately
-Busy on Busy for call Call Distribution Group switchable together
To select Network Provider via LCR
Check in / Check out for Hotel applications. Will start and stop call logging and switch
on or off trunk line access.
Pageing Announcement to System Phones. Programmable function Button - Page
specific Extensions.
Display Call Cost
Malicious Call Identification via ISDN-Exchange
Sending of stored DTMF Tones (1..0 * #) for a remote interogation of a Telephone
Answering Machine (TAM)
Possible to make the ringing extension go off hook from another phone.
Log in and out of Groups and their features
To use a Headset (only Digital System Phones)
To mute microphone on your telehpone.
TAM activation
TAM info
TAM Memo
Reject
Call Waiting
Enabled / off
Call Deflection
Call Filter
Call Log
Cleaning
Do not Disturb
(DND)
Night Service
(AVA 2)
Call Forwarding
Tannoy
Busy on Busy
Call by Call
Check In/ Check
Out
Page (Tannoy)
Units
Call Capture
Remote functions
Remote Answer
Group Button
Headset
Mute Button
