13
AGFEO System Telephone
Expansion STE 40
Select a suitable location for theSTE 40 to be installed. Please observe the following points:
- Do not use locations where the unit could be subjected to water or chemicals.
- Rubber feet of the Console:
Your console has been manufactured for general use. Some chemicals found in furniture
polish or other furniture care products may alter the substance of the rubber feet of the
unit. Due to this influence it may be possible that the rubber feet of the DSS Console may
leave some marks. We will not accept any liability for any of such occurrences. With
reference to new furniture or polished furniture we would suggest to use a non-slip
protective matt for your DSS Console.
Insert Button Label
Cleaning
Location
To clean your DSS Console
use a soft damp cloth
. An antistatic cloth may also be used.
NEVER use a dry cloth
as this could result in a static discharge which may damage electronic
components within the unit. Please take great care that
NO MOISTURE
will enter the console.
The label can be removed by inserting the finger
nail on the top of the plastic insert and housing.
Move the insert downwards until it is curved.
The label can now be removed.
To re-insert the label put the bottom of the clear
plastic strip in the bottom slot of the telephone
and follow the instruction above in reverse
order.
To give a professional appearance, labels can be
printed with the programming tool TK-Suite
directly from your PC.
