mDT001 HazMon System Tester Technical Manual /17
CMC INDUSTRIAL ELECTRONICS LTD
Phone: (604) 421-4425 Toll Free: (888) 421-4425 Fax: (604) 421-7734
www.cmciel.com sales@cmciel.com
The Industry Leader in HazMon Technology
3.5 Sensor Configuration
The tester can configure the mTS017 Infrared Temperature Sensor, the mVM001 Vibration
Sensor, the mCP001 Proximity Capacitor Sensor, mPTH001 Pressure Humidity Temperature
sensor and digital grain cables.
To connect digital grain cable special adapter must be used. CMC part number is 12077.
3.5.1 Configuration of mTS017, mVM001, mCP001 and mPTH001
1.
Select “
Sensor Config
” from the main menu;
2. The display will indicate:
3. Once connected, the display will indicate;
4. Once the serial number has been retrieved the display will momentarily indicate;
5. After displaying the serial number the display will indicate;
6. Once the current configuration of the sensor has been read the display will show the
values for the sensors configuration parameters. Use the
<Up>
and
<Down>
keys to
select the sensor parameter;
7. To change a sensor parameter, first select the parameter using the
<Up>
and
<Down>
keys and then press the
Select
key. A left and right arrow will appear on the display
indicating it is in change mode. Use the
<Up>
and
<Down>
keys to set the value and
then press the
<Select>
key to confirm the value. The arrows will disappear when the
value is confirmed;
8. To save the values to the sensor, use the
<Down>
key until the display indicates;
Connect sensor
to configure
166- 0-188- 58
230- 0- 17- 52
Wait getting
Serial number
Getting config
> > > > > > > > > > >
Save
Press Select
