31025 R0
5
1
1.. IIn
nttrro
od
du
uc
cttiio
on
n
Thank you for purchasing a Wheatheart X-Tend Hopper. This equipment will allow safe and efficient
operation when you read and follow all of the instructions contained in this manual. With proper care,
your X-Tend hopper will provide you with many years of trouble-free operation.
Keep this manual handy for frequent reference and to review with new personnel. A sign-off form is
provided on the inside front cover for your convenience. If any information in this manual is not
understood or if you need additional information, please contact your local distributor or dealer for
assistance.
This manual should be regarded as part of the equipment. Suppliers of both new and second-hand
equipment are advised to retain documentary evidence that this manual was provided with the
equipment.
This manual describes the assembly and operation of the X-Tend hopper, used as an accessory on X130
grain augers, and is intended as a supplement to your X130 Series Auger Operator Manual. Refer to
the appropriate manual for additional operating and maintenance instructions.
1.1. Serial Number Location
Always give your dealer the serial number on your X-Tend hopper (shown below) when ordering parts or
requesting service or other information. Please record this information in the table below for easy reference.
Model Number
Serial Number
Date Received
Figure 1.
Serial Number Location
X-TEND HOPPER – X130
