JR6: Mechanical Setting
• Remove vertical shielding plate between motor and mechanical
system (green arrow in Fig.
) due to access to third screw.
• Correct distance (approx. 0.3 mm) between circle plate and damp-
ing pad can be indicated by the piece of paper (business card).
• The system is set properly when you can insert this paper between
damping foam and bottom plate easily, but without any space left,
as you can see in Fig
.
•
DO NOT
forget to tighten the nuts after successful adjustment.
Figure 5: Three screws on round plate
Figure 6: Correct distance between round plates
Service note
page 5
