101
Agilaire 8872 Manual
Chapter 3 Logger - Central Communications
To create the individual push tasks, use
Configuration->Task Scheduler
and
Add->Scheduled
Report Task
to choose any of the
Push
type reports. (Push Average Data, Push Calibration
Data, etc). You may also wish to create
Group Task
and put all the
push
tasks under the group
task for easier management.
Use the
Configure Report Query
button to choose the desired parameters, intervals, etc. for
each push task. For the Date Range, we would recommend using
Lookback Minutes
and
setting the lookback to a value equal to or greater than the task execution frequency (e.g., if
pushing data every 5 minutes, set the lookback to at least 5 minutes). If the logger is polling
another device through Instrument Polling (e.g., BAM), consider adding enough overlap to
handle short-term communication outages to the other device.
