70
Configuring Digital Triggered Events
1. Highlight the
Data Logger
in
Configuration Editors > Logger Channels
tree menu.
2. Click the green
Add
button in the ribbon and select
Add Digital Events > Triggered Event
..
3. Enter a Triggered
Digital Event Program Name
, an
Output Duration
and check
Enabled
.
After the output duration time period, the program will check the digital input pattern to see if
it still matches. If not, the output control lines will be switched off. If the pattern still matches,
the output relays will remain on, and the duration time will begin again.
4. If the Digitally Triggered Event is for a calibration, select a
Calibration Name
from the
drop-down list.
5. Click the
Output Lines
button to bring up the output
Line Status Pattern
screen and select
which
Output Line or Lines
will be switched on when the triggered digital input pattern
occurs.
Click
OK
..
Agilaire 8872 Manual
Chapter 2 Configuration
Line Status Pattern for Output Lines
