Agilent Technologies 1664A Service Manual Download

Page: 163 / 164



1987–2000

Reproduction, adaptation, or
translation without prior written
permission is prohibited, except as
allowed under the copyright laws.

Document Warranty

The information contained in this
document is subject to change
without notice.

Agilent Technologies makes no
warranty of any kind with
regard to this material,
including, but not limited to,
the implied warranties or
merchantability and fitness for
a particular purpose.

Agilent Technologies shall not be
liable for errors contained herein
or for incidental or consequential
damages in connection with the
furnishing, performance, or use of
this material.

Complete product warranty
information is given at the end of
this manual.

Safety

This apparatus has been designed
and tested in accordance with IEC
Publication 348, Safety
Requirements for Measuring
Apparatus, and has been supplied
in a safe condition. This is a Safety
Class I instrument (provided with
terminal for protective earthing).
Before applying power, verify that
the correct safety precautions are
taken (see the following warnings).
In addition, note the external
markings on the instrument that
are described under "Safety
Symbols."

Warning

•

Before turning on the

instrument, you must connect the
protective earth terminal of the
instrument to the protective
conductor of the (mains) power
cord. The mains plug shall only be
inserted in a socket outlet
provided with a protective earth
contact. You must not negate the
protective action by using an
extension cord (power cable)
without a protective conductor
(grounding). Grounding one
conductor of a two-conductor
outlet is not sufficient protection.

•

Only fuses with the required

rated current, voltage, and
specified type (normal blow, time
delay, etc.) should be used. Do not
use repaired fuses or
short-circuited fuseholders. To do
so could cause a shock of fire
hazard.

•

Service instructions are for

trained service personnel. To avoid
dangerous electric shock, do not
perform any service unless
qualified to do so. Do not attempt
internal service or adjustment
unless another person, capable of
rendering first aid and
resuscitation, is present.

•

If you energize this instrument

by an auto transformer (for voltage
reduction), make sure the common
terminal is connected to the earth
terminal of the power source.

•

Whenever it is likely that the

ground protection is impaired, you
must make the instrument
inoperative and secure it against
any unintended operation.

•

Do not operate the instrument

in the presence of flammable
gasses or fumes. Operation of any
electrical instrument in such an
environment constitutes a definite
safety hazard.

•

Do not install substitute parts or

perform any unauthorized
modification to the instrument.

•

Capacitors inside the instrument

may retain a charge even if the
instrument is disconnected from
its source of supply.

•

Use caution when exposing or

handling the CRT. Handling or
replacing the CRT shall be done
only by qualified maintenance
personnel.

Safety Symbols

Instruction manual symbol: the
product is marked with this symbol
when it is necessary for you to
refer to the instruction manual in
order to protect against damage to
the product.

Hazardous voltage symbol.

Earth terminal symbol: Used to
indicate a circuit common
connected to grounded chassis.

W A R N I N G

The Warning sign denotes a
hazard. It calls attention to a
procedure, practice, or the like,
which, if not correctly performed
or adhered to, could result in
personal injury. Do not proceed
beyond a Warning sign until the
indicated conditions are fully
understood and met.

C A U T I O N

The Caution sign denotes a hazard.
It calls attention to an operating
procedure, practice, or the like,
which, if not correctly performed
or adhered to, could result in
damage to or destruction of part or
all of the product. Do not proceed
beyond a Caution symbol until the
indicated conditions are fully
understood or met.

Agilent Technologies
P.O. Box 2197
1900 Garden of the Gods Road
Colorado Springs, CO 80901