background image

14

Probing Solutions

Technologies

Choose the Optimum Probing
Strategy for Your Application

Advantages

Limitations

Most flexible method. 

Can be time-consuming to connect a large 

Flying-lead probes are included with logic 

number of channels. Least space-efficient 

analyzer module (except 16760A).

method.

Figure 3.2. 

Figure 3.4. Surface mount IC clip.
5090-4356 (20 clips).

Figure 3.5. 0.5 mm IC clip.
10467-68701 (4 clips).

Figure 3.6. Wedge adapters connect to multiple
pins of 0.5 mm or 0.65 mm QFP ICs. Refer to
“Probing Solutions for Agilent Technologies
Logic Analysis Systems,” publication number
5968-4632E, for specific part numbers.

Connecting to individual test
points with flying leads

Advantages

Limitations

Rapid access to all pins of fine-pitch 

Requires minimal keepout area.

QFP package.
Very reliable connections.

Figure 3.7. 

Refer to “Probing Solutions for
Agilent Technologies Logic Analysis
Systems,” publication number 
5968-4632E, for specific solutions.

Connecting to all the pins of a
quad flat pack (QFP) package

NEW Figure 3.3. The E5382A single-ended flying lead 
probe set provides connections for 17 channels of 
the 16760A logic analyzer.

Summary of Contents for 16700 Series






























































































































Reviews: