93
State/Timing Modules Specifications and
Characteristics
Agilent Technologies 16715A, 16716A, 16717A, 16740A, 16741A, 16742A,
16750A, 16751A, 16752A Supplemental Specifications* and Characteristics (continued)
State Mode
16715A, 16716A, 16717A
16750A, 16751A, 16752A
167 Mb/s State Mode
400 Mb/s State Mode
Trigger resources
8 Patterns evaluated as =,
≠
, >, <,
≥
,
≤
8 Patterns evaluated as =,
≠
, >, <,
≥
,
≤
4 Ranges evaluated as in range, not in range
4 Ranges evaluated as in range, not in range
2 Occurrence counters
2 Occurrence counters
4 Flags
4 Flags
Trigger resource conditions
Arbitrary Boolean combinations
Arbitrary Boolean combinations
Trigger actions
Goto
Goto
Trigger and fill memory
Trigger and fill memory
Store qualification
Default
Default
Maximum occurrence counter
16,777,215
16,777,215
Maximum pattern/range width
32 bits
32 bits
Data in to trigger out (BNC port)
150 ns, typical
150 ns, typical
Flag set/reset to evaluation
110 ns, typical
110 ns, typical
Timing Mode
16715A, 16716A, 16717A
16740A, 16741A, 16742A, 16750A, 16751A, 16752A
Timing analysis sample rate
667/333 MHz
800/400 MHz
(half/full channel)
Channel count
68 per module
68 per module
Maximum channels on
340
340
a single time base and trigger
Number of independent analyzers
2, can be setup in state or timing modes
2, can be setup in state or timing modes
Sample period (full channel)
3 ns to 1 ms
2.5 ns to 1 ms
Sample period (half channel)
1.5 ns
1.25 ns
Minimum data pulse width
for data capture
Conventional timing
1.75 ns
1.5 ns
Transitional timing
3.9 ns
3.8 ns
For trigger sequencing
6.1 ns
5.1 ns
Sample period accuracy
±(100 ps + .01% of sample period)
±(100 ps + .01% of sample period)
Channel-to-channel skew
< 1.5 ns
< 1.5 ns
Time interval accuracy
± (sample channel-to-channel
± (sample channel-to-channel
skew + .01% of time interval reading)
skew + .01% of time interval reading)
Minimum detectable glitch
1.5 ns
1.5 ns
Memory depth (half/full channel)
16716A: 1M/512K
16750A: 8/4M
16715A, 16717A: 4/2M
16751A: 32/16M
16752A: 64/32M
* All specifications noted by an asterisk are the performance standards against which the product is tested.
