54
16901A Logic Analysis System Service Guide
6
Replacing Assemblies
To remove and replace the PCI or display board
1
Perform previous procedures:
•
“To prepare the instrument for disassembly”
•
“To remove and replace the cover”
2
Disconnect the cable from the board you are replacing.
3
Using a Torx T10 screwdriver, remove the screws securing
the board to the rear panel.
4
Lift the board out of the socket to remove.
5
To replace a board:
a
Ensure that the tab on the board’s rear panel is
aligned with the slot in the deck.
b
Press the board securely into the socket on the
motherboard.
c
Replace the screw.
T-10 screws (2)
PCI cable
Display cable
Tab
Slots in deck
Summary of Contents for 16901A
