1
Introduction
16
N1911A/1912A P-Series Power Meters User’s Guide
Figure 1-6
Trace display in single enlarged window in trigger delay mode
Figure 1- 6
shows a single enlarged window with the
Gate Ctrl
menu and
associated tables and trigger delay.
30
Pressing
removes the gate markers and displays the trigger
marker(s). The
indicates when the trigger event occurs, whilst
shows the delayed trigger point. When the two points coincide only the
trigger is shown.
In the example shown in
Figure 1- 6
, the
appears ahead of the
as
a trigger delay of
–
5.00 µs has been configured, placing the
measurement trigger before the trigger event. You can configure the
trigger delay by pressing and entering a numeric value.
To indicate an off- screen trigger event,
is displayed. To indicate an
off- screen trigger point,
is displayed.
31
The selected channel and gate number is displayed.
32
The trigger setting and slope is displayed. Examples shown in
Figure 1- 6
are Internal Channel A and a Positive Slope.
30
32
31
Select TgDel
