Features and Functions
2
34405A User’s and Service Guide
41
Storing and Recalling Instrument States
You can save and recall complete instrument states including all front
panel settings, all math registers, all Utility Menu settings, and all bus
specific settings. There are four user storage registers numbered 1 through
4. An additional state, state 0, is managed by the instrument and stores
the last power- down state. The instrument automatically saves the
complete instrument configuration to State 0 whenever a power- down
event occurs.
For remote operation, refer to the MEMory Subsystem, the *SAV, and *RCL
commands in the
Agilent 34405A Online Programmer’s Reference
online
help.
Storing a State
Before storing an instrument state, select the measurement function,
range, math operations, and so on, that you want saved as a state. To
store the instrument state:
1
Press
, the display
Store
and
Recall
annunciators will begin
flashing.
2
Press or
until
only
the
Store
annunciator is flashing.
3
Press
again.
4
Press
or
until the state number (1- 4) you want to use is
shown flashing in the secondary display.
5
Press
to store the state. The secondary display briefly shows
donE
when the state is successfully saved.
N O T E
The store function in the utility menu must be enabled (On) before you can store states.
Refer to
“Using the Utility Menu”
on page 36 for details.
Store
Recall
Store
Recall
Store
Recall
Store
Recall
Store
Recall
Store
Recall
Downloaded from
www.Manualslib.com
manuals search engine
