44
34410A/11A User’s Guide
2
Features and Functions
•
If the multimeter is configured to take the measurement using an
aperture
integration time, pressing
or
during front panel
measurement operations will display
APERTURE
on the the main display
line and the current setting on the second display line (e.g.
101.005mSEC
)
.
You can then use the navigation keypad to change the aperture setting.
Press
to save the setting. If you wish to keep the previous setting,
press
and do not save the changes.
•
If either the ac voltage or ac current measurement function is selected,
pressing
or
during front panel measurement operations will
increase or decrease the bandwidth setting, and briefly display the new
setting on the second display line (e.g. if the setting was
20 HZ : MEDIUM
,
the display will show
3 HZ : SLOW
when you press
). Repeated use of
or
will scroll through the selection of three bandwidth settings (
3
HZ : SLOW, 20 HZ : MEDIUM and 200 HZ : FAST
).
•
If the frequency/period measurement function is selected, pressing
or
during front panel measurement operations will increase or
decrease the gate time setting, and briefly display the new setting on
the second display line (e.g. if the setting was
0.1 GATE TIME
, the display
will show
0.01 GATE TIME
when you press
). Repeated use of
or
will scroll through the selection of gate time settings (
0.001 GATE TIME, 0.01
GATE TIME,
0.1 GATE TIME
and
1 GATE TIME
).
Front Panel Alphanumeric Character Entry
When you are in the menus for storing instrument states (
see
on page 51), data logging and advanced triggering, you may
need to manually enter an alphanumeric character on the second display
line.
•
To enter a number or character
, press
or
to select the displayed
character (digit or letter) you wish to edit. The selected character will
flash to indicate it can be edited. Use the
and
keys to modify a
digit (from
0
to
9
) or a letter (from
A
to
Z
).
•
To quickly enter large numbers
, you may press
to scroll over to the most
significant digit allowed and/or add leading zeros, instead of
incrementing the less significant digits up from zero. For non–zero
floating–point entries, you may also press
to scroll to the magnitude
prefix (e.g.
u
,
m
,
k
,
M
), then use the
and
keys to change the
numerical entry.
The left and right arrow annunciators on the second display line will
indicate if there are editable characters left or right of the one selected.
Summary of Contents for 34410A
