34410A/11A User’s Guide
49
Features and Functions
2
Advanced Configuration Options
Power-On State
At power–on, the multimeter displays all segments of the two–line display
and all annunciators, for a period of several seconds, then changes to the
default display mode. The following tables show the state of multimeter
parameters at power on. Parameters marked with a bullet (
●
) are stored
in non–volatile memory, and are not affected by power–on or a system
reset. For those parameters, the initial factory settings are shown. All
other parameters are stored in volatile memory, and are reset to the
indicated values at power–on, after a front–panel Reset command, or after
a *RST or SYSTem:PRESet command is issued from the remote interface.
Measurement Configuration
Factory Setting
Function
DC Volts
Range
Autorange (for all functions)
*
Resolution
6.5 digits (0.3 ppm x Range)
*
Integration Time
NPLC on, 1 PLC
*
Autozero
On
*
Aperture
Off, 1 second
*
●
Input Impedance
●
10 M
W
(fixed for all VDC ranges)
AC Input Filter (bandwidth)
20 Hz (medium filter)
Nulls (for individual measurement functions)
Off, 0 for all measurement functions
Second Display
Off
*
for all dc measurements
Math Operations
Factory Setting
Math State
Off
Math Registers
Cleared (all registers)
dB relative value
0
dBm reference resistance
600
W
Triggering Operations
Factory Setting
Trigger Count
1
Trigger Source
Immediate
Trigger Delay
Auto Delay
Sample Count
1
Sample Source
Auto
Sample Timer
1 second
Summary of Contents for 34410A
