54
34410A/11A User’s Guide
2
Features and Functions
•
Front Panel Operation:
After selecting an applicable measurement function
(
DC V
,
DC I
,
W
2W
,
W
4W
or
TEMP
), press
until
INTEGRATION
is
displayed. press
or
to select
NPLC
, then press
or
to
display
NPLC
on the primary line and a range of choices on the
secondary line. Press
or
to select the desired NPLC value, and
press
. Then step through or exit the configuration menu.
•
Remote Interface Operation:
The following commands set the integration
time in NPLC:
[SENSe:]VOLTage[:DC]:NPLC {<PLCs>
>
MIN
>
MAX
>
DEF}
[SENSe:]CURRent[:DC]:NPLC {<PLCs>
>
MIN
>
MAX
>
DEF}
[SENSe:]RESistance:NPLC {<PLCs>
>
MIN
>
MAX
>
DEF}
[SENSe:]FRESistance:NPLC {<PLCs>
>
MIN
>
MAX
>
DEF}
[SENSe:]TEMPerature:NPLC {<PLCs>
>
MIN
>
MAX
>
DEF}
The following command (similar queries for current, resistance and
temperature) queries the integration time setting:
[SENSe:]VOLTage[:DC]:NPLC? [{MIN
>
MAX}]
Refer to the
Agilent 34410A/34411A Programmer’s Reference
for
complete description and syntax for these commands.
Aperture
is the period, measured in
seconds
, during which the
multimeter’s analog–to–digital (A/D) converter samples the input signal for
a measurement. A longer aperture yields better resolution; a shorter
aperture provides for faster measurements. This selectable feature allows
the user to set a specific measurement period, not based on power line
frequency. Selectable values range from 300
3
s to 1 second for the
34410A, and from 100
3
s to 1 second for the 34411A.
•
To allow for normal mode (line frequency noise) rejection, select the
NPLC
option for
INTEGRATION
, with an integral number of NPLCs. Use the
APERTURE
method only if you
need
precise control over the multimeter’s
integration time, in seconds.
•
Front Panel Operation:
After selecting an applicable measurement function
(
DC V
,
DC I
,
W
2W
,
W
4W
or
TEMP
), press
until
INTEGRATION
is
displayed. Press
or
as needed to select
APERTURE
, then press
or
to display
APERTURE
on the primary line and the current aperture
value on the secondary line. Use the navigation keypad to select the
desired aperture value, and press
. Then step through or exit the
configuration menu.
Summary of Contents for 34410A
