34410A/11A User’s Guide
95
Remote Interface Configuration
3
Setting up a LAN connection from the Remote Interface
•
To enable or disable the LAN remote interface:
SYSTem:COMMunicate:ENABle {OFF
>
0
>
ON
>
1},LAN
•
To enable or disable the use of DHCP for the LAN interface:
SYSTem:COMMunicate:LAN:DHCP {OFF
>
0
>
ON
>
1}
•
To enable or disable the use of Auto–IP for the LAN interface:
SYSTem:COMMunicate:LAN:AUTOip[STATe] {OFF
>
0
>
ON
>
1}
•
To assign the LAN a static IP address:
SYSTem:COMMunicate:LAN:IPADdress <address>
•
To assign a LAN Subnet Mask:
SYSTem:COMMunicate:LAN:SMASk <address>
•
To assign a LAN Default Gateway:
SYSTem:COMMunicate:LAN:GATEway <address>
•
To assign a LAN Host Name:
SYSTem:COMMunicate:LAN:HOSTname “<name>”
•
To assign the LAN a static DNS address:
SYSTem:COMMunicate:LAN:DNS <address>
•
To assign a LAN Domain Name:
SYSTem:COMMunicate:LAN:DOMain “<name>”
Query forms of these commands are also available. Refer to the
Agilent
34410A/34411A Programmer’s Reference
for complete command
description and syntax.
Summary of Contents for 34410A
