2-48
Agilent 4155B/4156B VXIplug&play Driver User’s Guide, Edition 4
Driver Functions
Driver Functions for the E5250A
Table 2-2 lists all the functions for the E5250A. You will see a brief description of
the functions in the table.
For the description, syntax and parameters of the function, refer to the reference
section following this table. The driver functions in the reference section will appear
in the alphabetical order.
Table 2-2
E5250A Driver Function Lists
Category Function
Description
Miscellaneous
hpe5250a_init
Initializes the E5250A.
hpe5250a_close
Closes the connection with the E5250A.
hpe5250a_reset
Executes the E5250A reset.
hpe5250a_self_test
Executes the E5250A self-test.
hpe5250a_error_query
Queries for the E5250A error code/message.
hpe5250a_error_message
Queries for the driver error.
hpe5250a_revision_query
Queries for the E5250A firmware/driver revisions.
hpe5250a_timeOut
Sets the timeout.
hpe5250a_timeOut_Q
Queries for the timeout setting.
hpe5250a_errorQueryDetect
Sets the automatic error checking.
hpe5250a_errorQueryDetect_Q Queries for the automatic error checking setting.
hpe5250a_dcl
Sends the Device Clear.
hpe5250a_esr_Q
Queries for the ESR status.
hpe5250a_readStatusByte_Q
Reads the E5250A status byte.
hpe5250a_opc_Q
Checks the E5250A operation completion status.
Mode Control
hpe5250a_func
Sets the configuration mode.
hpe5250a_connRuleSeq
Sets the connection rule/sequence.
Bias Mode
hpe5250a_biasPort
Selects the input bias port.
hpe5250_biasChanCard
Selects the card for bias mode.
hpe5250_biasChanList
Selects the channel list for bias mode.
hpe5250a_biasState
Sets the bias port state.
hpe5250a_biasChanList_Q
Queries for the bias channel list.
